Die Cast Aluminum Magnesium: 2 Shaft Shear Skeleton Metal Shredder |
|
 |
Skeletons
Off Spec Parts
Trimmings
|
Large 2 Shaft Shear Shredder Technology Shredding Of Aluminum Magnesium
METAL SHREDDERS INCREASE REMELT EFFICIENCY
Eliminate Nesting — Increase Scrap Density — Reduce Labor Cost
A common problem found in the die cast industry is the "nesting" of
skeletons and runners prior to remelt. This makes the handling of these
parts extremely difficult, which results in poor efficiency and loss of
money due to labor cost. Shear Shredders and Metal Shredders are ideally suited for processing
skeletons, runners and parts which do not have pour cups or
"pucks."
The Komar Large 2 Shaft
Shear Shredder offers
Komar's series of Large 2
Shaft Shear Shredders and Metal Shredders can be
utilized for processing of
scrap as an integrated part
of the remelt line. Ideal for
processing skeletons, runners
and parts which do not
have pour cups or "pucks." |
 |
 |
 |
Hydraulically driven
400hp shear |
Nested skeletons
prior to processing
|
Electro-mechanical
75hp shear |
Standard Features
 |
Isolated sealed bearings |
|
Direct driven shafts - no gearbox |
|
Hydrostatic drive |
|
High torque/low speed design |
|
Heavy duty forged steel alloy shafts |
|
|
Modular designed subcomponents |
|
Standard and high strength alloy steel cutters |
|
"ESP" extreme shock protection |
|
IEC electrical controls |
|
Programmable logic controller control |
|
Optional Accessories
|
Custom-designed support stand & hoppers |
|
Service platforms w/ladder |
|
Remote control console w/stand |
|
Soft start |
|
Power feed rollers |
|
Hydraulic infeed hopper ram |
|
|
Material infeed/outfeed equipment (dumpers, conveyors, grapples) |
|
Standard or custom-built hopper |
|
Maintenance contract |
|
Diesel drive |
|
Support stand |
|
| TECHNICAL DATA |
| Model |
4032-HS |
4840-HS |
6040-HS |
7248-HS |
| Electric Drive (hp) |
100 |
100 |
1 - 75/ 100/ 200 |
1 - 200 |
| Voltage |
480 V/ 60 Hz |
480 V/ 60 Hz |
480 V/ 60 Hz |
480 V/ 60 Hz |
| Infeed Charge Opening (B X A) |
40" x 32" |
48" x 40" |
60" x 40" |
72" x 48" |
| Hexagonal Shaft |
6" |
6" |
6" |
6" |
| RPM |
Variable - 20 |
Variable - 18 |
Variable - 24 |
Variable - 24 |
| Number of Hyd. Motors |
2 |
2 |
2 |
2 |
| Dim. of Shredder (LWH) |
133" x 48" x 40" |
141" x 54" x 46" |
153" x 54" x 46" |
165" x 61" x 48" |
| Weight of Shredder*** lbs. |
12,600 |
16,500 |
18,500 |
36,500 |
| Model |
4848-HSS |
6048-HSS |
7248-HSS |
10048-HSS |
| Electric Drive (hp) |
2 - 100 |
2 - 200 |
2 - 200 |
2 - 300 |
| Voltage |
480 V/ 60 Hz |
480 V/ 60 Hz |
480 V/ 60 Hz |
480 V/ 60 Hz |
| Infeed Charge Opening (B X A) |
48" x 48" |
60" x 48" |
72" x 48" |
100" x 64" |
| Hexagonal Shaft |
9" |
9" |
9" |
12" |
| RPM |
Variable - 24 |
Variable - 24 |
Variable - 24 |
Variable - 24 |
| Number of Hyd. Motors |
4 |
4 |
4 |
4 |
| Dim. of Shredder (LWH) |
141" x 61" x 48" |
153" x 61" x 48" |
165" x 61" x 48" |
193" x 61" x 48" |
| Weight of Shredder*** lbs. |
33,750 |
36,250 |
39,250 |
45,250 |
Specifications are subject to change
***Base weight less Hydraulic Power Unit
|
