Dual Auger Industrial Shredders: Herculean II

Herculean II Hydro-Auger Processor

The KOMAR Herculean II Hydro-Auger Processor is the perfect solution for heavy-duty applications where higher hourly throughputs are required. Like the Viking II model industrial shredder, it handles the primary shredding of waste at the lowest online operating cost of any volume reduction equipment. It also handles a high volume of difficult material at low speed with minimum noise, dust and energy requirements. Like the Viking II, the Herculean II offers independent counter-rotating dual augers for aggressive shredding, but it derives its enhanced power from higher auger speeds and higher torque.

HGD-3-400 industrial shredder shown	Doors allow for sizing and blending	Easy to maintain screw augers	Hydrostatic Power Unit
	Utilized by Construction & Demolition Haulers Solid Waste (Municipal Solid Waste) Landfills & Transfer Stations Heavy Industrial Applications Pallet Rebuilders Material Recovery & Scrap Yards Energy Recovery Systems (Industrial, Utilities, etc.) Incineration Operations

Materials Processed Construction & Demolition Debris Railroad Ties Tree Stumps 55-Gallon Drums (empty or full) 300-Gallon Liquid Packs Utility Pole Cutoffs Baled Materials Product Destruction Cable Reels (up to 60") Oversized Pallets (up to 70") Wood Crates Corrugated Containers Fiber Butt Cores Packaging Materials Hardwood Pallets White Goods

Features Large infeed hopper for feeding from all sides Material discharge doors for controlled retention allow for varying piece size Hydrostatic Drive, variable-speed, high torque, low-horsepower, shock-resistant operation Independent, direct driven dual augers counter-rotate Shafts vary in speed, torque and direction Heavy duty forged steel alloy shafts Fast auger changeouts Isolated sealed bearings Modular designed subcomponents Severe shock protection High-grade NEMA 4 electrical enclosures IEC electrical controls Programmable logic controller control

Optional Accessories Custom-Designed Support Stand Service Platform w/Ladder Dust Suppression System Cold Weather Package Material Infeed/ Outfeed Equipment Standard or Custom-Built Hopper Maintenance Contract Diesel Drive Soft Start

Throughputs (per hour)** In-Plant Waste 20,500 - 60,000 lbs. Pallets 20,000 - 80,000 lbs. Wood Dunnage 25,000 - 80,000 lbs. Municipal Solid Waste 20,000 - 80,000 lbs. C & D Debris 25,000 - 100,000 lbs. White Goods 15,000 - 60,000 lbs. Fiber Butt Cores 14,000 - 50,000 lbs. 55-Gallon Drums (empty or full)    5,000 - 8,000 lbs. 300-Gallon Liquid Packs 4,000 - 45,000 lbs. Utility Pole Cutoffs 22,000 - 60,000 lbs. Railroad Ties 22,000 - 60,000 lbs. Cable Reels (up to 60") 20,000 - 60,000 lbs. ** Estimates are a result of representative sample testing. Actual throughput rates may vary, dependent upon methods of feed and materials consistency. Throughputs are for reference only — contact the factory for throughput ratings on specific materials.

TECHNICAL DATA
Model	HDD-3-200	HGD-3-400	HPD-3-400
Electric drive (hp)	2-100	2-200	2-200
Voltage	480 V / 3 phase / 60 Hz	480 V / 3 phase / 60 Hz	480 V / 3 phase / 60 Hz
Optional Stand	Variable	Variable	Variable
Charge Opening	62" x 70"	72" x 100"	86" x 108"
Shafts	2 - 12" tapers to 6"	2 - 16" tapers to 6"	2 - 16" tapers to 6"
Auger Diameter	34" tapers to 20"	42" tapers to 20"	52" tapers to 24"
Auger Speed Range	Variable to 20 RPM	Variable to 20 RPM	Variable to 27 RPM
No. of Hydraulic Motors	4	4	4
Dimensions of Shredder (LWH)	100" x 86" x 89"	184" x 108" x 100"	212" x 112" x 139"
Weight (approx.)	41,000	60,000	84,000
Maximum Charge Capacity*	4 cu. yd.	6 cu. yd.	8 cu. yd.
HPU dimensions (LWH)	10'3" x 6' 9" x 9'6"	10'3" x 6' 9" x 9'6"	10'3" x 6' 9" x 9'6"

Specifications are subject to change   * Operational volumes will vary with materials and horsepower selection.