| HM Auger Compactor |
 |
 |
The Komar HM Auger is a general-purpose industrial shredder / compactor that handles volume reduction and compacting in one step. Like the EM Auger, it utilizes the volume reducing and compacting action of a high-torque, low-speed screw auger with minimum noise, dust and energy requirements, but is ideal for more difficult oversize or bulky materials. The HM features anti-jamming action and compacts into containers that hold up to 40 cubic yards of material.
 |
 |
 |
 |
Heavy Industrial Waste
|
Easy to Maintain Screw Auger
|
One Step Shredding / Compacting |
HM Compactor Container Being Dumped
|
|
Utilized by
 |
Municipalities |
|
Industrial Facilities |
|
Utility Companies |
|
Waste Management Facilities |
|
Material Recovery Operations |
|
Landfills |
|
Transfer Stations |
|
Construction & Demolition Operations |
|
Materials Processed
|
Industrial Waste |
|
Municipal Waste |
|
Construction & Demolition Debris |
|
Railroad Ties/Utility Poles |
|
Cable Reels |
|
Oversize & Hardwood Pallets |
|
Wood Crates |
|
Corrugated Containers |
|
Fiber Butt Cores |
|
White Goods/Drums |
|
Baled Materials |
Optional Features
|
Standard Roll-Off Container Adapter |
|
Cart Dumpers |
|
Container Gone Indicator |
|
Container IslandGuide |
|
Custom Infeed Hopper/Chutes |
|
Custom Paint Colors |
|
Standard Features
|
High Capacity Roller Bearings |
|
Integrated Seals To Maximize Bearing Protection |
|
Solid Steel Alloy Auger Shaft |
|
Cast Steel Flighting |
|
Hydrostatic Drive With Shock Resistant Operation |
|
Anti-jam Device |
|
Adjustable Run Time |
|
Programmable logic Controller |
|
IEC Electrical Controls |
|
(Nickel) Machinery Enamel Finish |
|
Double Thick End Flight For Extended Wear |
|
Automatic Lube System |
|
Throughputs (per hour)**
|
| In-Plant Waste |
11,000 - 25,500 lbs. |
| Pallets |
8,500 - 18,000 lbs. |
| Paper/Cardboard |
3,500 - 18,000 lbs. |
| Wood/Dunnage |
11,500 - 26,000 lbs. |
|
| **
Throughput ratings are composite averages and vary with material density and type of unit used.
Contact the factory for throughput ratings on specific materials. |
|
|
| TECHNICAL DATA |
| Model |
HMD - 1 |
HMG - 1 |
HMP - 1 |
| Horse Power |
75 |
100 |
150 |
| Electrical (Voltage 3 Phase, 60 Hz.) |
480 |
480 |
480 |
| Electrical (Amperage) |
96 |
120 |
180 |
| Hopper Volume (cubic yards) |
4.8 |
7 |
9 |
| Charge Opening (A x B) |
52 x 60 |
60 x 72 |
76 x 72 |
| Hopper (C x B x D) |
70" x 60" x 36" |
80" x 72" x 36" |
76" x 76" x 36" |
| Dimensions of Shredder (LWH) |
86" x 85" x 96" |
102" x 96" x 100" |
110" x 102" x 104" |
| Screw Floor Taper |
40" to 30" |
50" to 33" |
60" to 36" |
| Extrusion Tube Diameter |
30 |
33 |
36 |
| Weight of Shredder Approximate |
8,000 Lbs |
12,500 Lbs |
15,000 Lbs |
| Revolutions Per Minute (RPM) |
15 |
15 |
15 |
| Total Maximum Force (Ft, Lbs.) |
145,000 Lbs |
200,000 Lbs |
280,000 Lbs |
| Shaft Torque (ft/lb) |
48,600 |
68,000 |
84,000 |
| Drive Type |
Hydro-Mech |
Hydro-Mech |
Hydro-Mech |
Specifications are subject to change
|
