| Thor Hydro-Auger Industrial Shredder |
 |
|
Waste that is extremely difficult to process — such as railroad ties with "s" clips and white goods — requires a machine that is up to the task. The Komar Thor Hydro-Auger industrial shredder provides primary shredding of the most difficult waste, including tramp materials. Is does its work with the lowest online operating cost of any volume reduction equipment. And, like Komar's other auger-centered equipment, the Thor industrial shredder operates at low speed with minimum noise, dust and energy requirements in order to handle high volumes of materials.
 |
 |
 |
 |
Model THA-12 shown with stand and take away conveyors and material screen for optional fines.
|
One Screw Processing Chamber
|
Optional rugged deep section trough screen. |
Hydrostatic Power Unit
|
 |
Utilized by
 |
RR Tie Processors |
|
Construction & Demolition Haulers |
|
Municipal Solid Waste |
|
Landfills & Transfer Stations |
|
Heavy Industrial Applications |
|
Material Recovery & Scrap Yards |
|
Energy Recovery Systems (Industrial, Utilities, etc.) |
|
Incineration Operations |
|
Materials Processed
|
Construction & Demolition Debris |
|
Railroad Ties with "S" clips and tie plates |
|
Tree Stumps |
|
55-Gallon Drums (empty or full) |
|
Utility pole cutoffs with spikes |
|
Cable reels with tie bolts |
|
Oversized Pallets |
|
Wood Crates |
|
Hardwood Pallets |
|
White Goods |
Optional Accessories
|
Trough Screen |
|
Custom-Designed Support Stand |
|
Service Platform w/Ladder |
|
Dust Suppression System |
|
Cold Weather Package |
|
Material Infeed/ Outfeed Equipment |
|
Standard or Custom-Built Hopper |
|
Diesel Drive |
|
Soft Start |
|
Magnets |
|
Features
|
Continuous operation with large infeed hopper |
|
Heavy duty solid forged steel alloy shaft available in 12" or 16" diameter with 2 1/2" cast flighting |
|
Hydrostatic drives, variable-speed, high torque, low-horsepower, shock-resistant operation |
|
Isolated sealed bearings |
|
Modular designed subcomponents |
|
High-grade NEMA 4 electrical enclosures |
|
IEC electrical controls |
|
Controlled by programmable logic controller |
|
Throughputs (per hour)**
|
Pallets |
45,000 - 80,000 lbs. |
| Wood Dunnage |
55,000 - 100,000 lbs. |
| Municipal Solid Waste |
7,000 - 120,000 lbs. |
| C&D Debris |
60,000 - 120,000 lbs. |
| White Goods |
30,000 - 55,000 lbs. |
| Utility Pole Cutoffs |
60,000 - 100,000 lbs. |
| Railroad Ties |
60,000 - 120,000 lbs. |
| Cable Reels |
50,000 - 60,000 lbs. |
|
| ** Estimates are a result of representative sample testing.
Actual throughput rates may vary, dependent upon methods
of feed and materials consistency. Throughputs are for
reference only — contact the factory for throughput ratings on
specific materials. |
|
|
| TECHNICAL DATA |
| Model |
THM-12 |
THA-12 |
THA-16 |
| Electric Drive (hp)/ diesel hp |
1 - 200 / 450 |
300 / 600 |
400 / 800 |
| Voltage |
460 V/ 3 phase / 60 Hz |
460 V/ 3 phase / 60 Hz |
460 V/ 3 phase / 60 Hz |
| Auger Flighting |
2 1/2" |
2 1/2" |
2 1/2" |
| Charge Opening (A x B) |
12' x 8' |
12' x 9'6" |
12' x 9'6" |
| Shaft Dia. Solid Steel |
12" |
12" |
12" |
| Auger Diameter |
40" |
42" |
50" |
| Auger Speed Range |
0 to 21 |
0 to 31 |
0 to 28 |
| No. of Hydraulic Motors |
1 |
2 |
2 |
| Dimensions of Shredder (LWH) |
22' x 8' x 9' |
24' x 10' x 10' |
28' x 10' x 10' |
| Weight (approx.) |
60,000 lbs. |
80,000 lbs. |
101,000 lbs. |
| Charge Capacity cu. yds. |
6 yd3 |
7 yds3 |
7 yds3 |
| HPU dimensions (LWH) |
9'6" x 5' x 9' / 113" x 7' x 7' |
9'6" x 5' x 9' |
9'6" x 6'9" x 10'3" |
| Thrust at 5,000 psi |
400,000 lbs. |
420,000 lbs. |
478,000 lbs. |
| Max. Torque at 5,000 psi |
60,000 ft./lbs. |
81,000 ft./lbs. |
96,000 ft./lbs. |
Specifications are subject to change
|
