| Viking I Hydro-Auger Compactor |
 |
 |
The Viking I Hydro-Auger is an industrial shredder / compactor, in one machine. The Viking I reduces the size and volume of difficult materials — from hardwood pallets to fiberglass products — with the shredding and compaction action of a high-torque, low-speed screw auger. The machine works with the minimum noise, dust and energy requirements and with hydraulic, automatic anti-jamming action. It can compact directly into 40-cubic-yard containers to legal limits or other configurations as needed.
 |
 |
 |
 |
Easy to maintain
screw auger
|
A 40 cu. yd. mates
to this series for
full legal loads
|
Installation to fit
your application |
The IDA-7, large in stature but in a small envelope, ideal for inplant volume reduction.
|
 |
Utilized by
 |
Industrial Facilities |
|
Utility Companies |
|
Pallet Rebuilders |
|
Warehouses |
|
Waste Haulers |
|
Material Recovery Facilities |
|
One Shift Operation |
|
Materials Processed
|
Industrial Waste |
|
Product Destruction |
|
Small Cable Reels |
|
Oversized Pallets |
|
Wood Crates |
|
Corrugated Containers |
|
Fiber Butt Cores |
|
Packaging Materials |
|
Hardwood Pallets |
|
Furniture |
|
Fiberglass Products |
Optional Accessories
|
Remote Console with Stand |
|
Dust Suppression with System |
|
Soft Start |
|
Maintenance Contract |
|
Container Dumpers 1 - 6 cu. yd. |
|
Material Infeed/Outfeed Equipment |
|
Matched Roll-off Container |
|
Hydraulic Container Locking Device |
|
Extended Controls for Upstream/Downstream Equipment |
|
Features
|
Industrial grade construction; 12" tapered forged steel alloy shafts 1 1/2" cast flights |
|
Shredding and compacting capabilities in one highly efficient machine |
|
Large infeed hopper for bulk feeding from three sides |
|
Processed material discharges horizontally (literally "conveyed" from the machine) |
|
Unique design tolerant of tramp material |
|
Low-speed, high-torque, low-horsepower design |
|
Fully-enclosed, hydrostatic drive system for shock-resistant operation |
|
Programmable logic controller (PLC) |
|
"Cartridge" drive assembly for simplified maintenance |
|
Direct driven shafts - no gearbox |
|
Throughputs (per hour)** (need this)
|
| 55 Gallon Drums |
30 - 100 Drums |
In-Plant Waste |
5,000 - 25,000 lbs. |
| Pallets |
8,000 - 25,000 lbs. |
| Paper/Cardboard |
750 - 28,000 lbs. |
| Wood/Dunnage |
750 - 30,000 lbs. |
|
| ** Throughput ratings are composite averages and vary with material
density and type of unit used. Contact the factory for throughput ratings
on specific materials.
|
|
|
| TECHNICAL DATA: Low Speed Single Hydro-Auger |
| Model |
IDA - 7 |
IGA - 7 |
IPA - 7 |
| Electric Drive (hp) |
30 |
50 |
100 |
| Voltage |
480 V/3 Phase/60 Hz |
480 V/3 Phase/60 Hz |
480 V/3 Phase/60 Hz |
| Hopper Opening (AB) |
81" x 60" |
94" x 70" |
108" x 100" |
| Infeed Charge Opening (CB) |
53" x 60" |
62" x 70" |
72" x 100" |
| RPM Auger |
Variable to 20 |
Variable to 20 |
Variable to 20 |
| Shaft |
12" tapers to 6" |
12" tapers to 6" |
12" tapers to 6" |
| Screw Flights |
34" x 18" x 1 1/2" |
40" x 20" x 1 1/2" |
52" x 24" x 1 1/2" |
| Auger Thrust (lbs.) |
157,000 |
169,000 |
210,000 |
| Extrusion Tube Diameter |
24" |
24" |
30" |
| Dimensions of Shredder (LWH) |
119" x 60" x 96" |
137" x 74" x 108" |
165" x 100" x 123" |
| Weight of Shredder approx. |
18,000 lbs. |
32,500 lbs. |
44,000 lbs. |
Specifications are subject to change
|
