| The Viking II Hydro-Auger Industrial Shredder |
 |
 |
The KOMAR Viking II Hydro-Auger Industrial Shredder provides primary shredding of difficult, oversize or bulky waste at the lowest online operating cost of any volume reduction equipment. It handles a high volume of waste at low speed with minimum noise, dust and energy requirements. The Viking II industrial shredder utilizes high-torque, independent counter-rotating dual augers for aggressive shredding.
 |
 |
 |
 |
Model GD-3-200industrial shredder shown
|
Doors allow for sizing
and blending
|
Easy to maintain screw
augers |
Hydrostatic Power Unit
|
 |
Utilized by
 |
Industrial Applications |
|
Pallet Rebuilders |
|
Material Recovery |
|
Energy Recovery Systems (Industrial, Utilities, etc.) |
|
Incineration Operations |
|
Materials Processed
|
Product Destruction |
|
55-Gallon Drums (empty or full) |
|
300-Gallon Liquid Packs |
|
Cable Reels (up to 60") |
|
Oversized Pallets (up to 70") |
|
Wood Crates |
|
Corrugated Containers |
|
Fiber Butt Cores |
|
Packaging Materials |
|
Hardwood Pallets |
|
White Goods |
Optional Accessories
|
Custom-Designed Support Stand |
|
Service Platform w/Ladder |
|
Dust Suppression System |
|
Cold Weather Package |
|
Material Infeed/ Outfeed Equipment |
|
Standard or Custom-Built Hopper |
|
Maintenance Contract |
|
Diesel Drive |
|
Soft Start |
|
Features
|
Large infeed hopper for feeding from all sides |
|
Material discharge doors for controlled retention allow for varying piece size |
|
Hydrostatic Drive, high-torque, low horsepower, shock-resistant operation |
|
Independent, direct driven dual augers counter-rotate |
|
Shafts vary in speed, torque and direction |
|
Heavy duty forged steel alloy shafts |
|
Fast auger changeouts |
|
Isolated sealed bearings |
|
Modular designed subcomponents |
|
Severe shock protection |
|
High-grade NEMA 4 electrical enclosures |
|
IEC electrical controls |
|
Programmable logic controller control |
|
Throughputs (per hour)**
|
| In-Plant Waste |
10,500 - 40,000 lbs. |
Pallets |
20,000 - 50,000 lbs. |
| Wood Dunnage |
15,000 - 50,000 lbs. |
| White Goods |
5,000 - 45,000 lbs. |
| Fiber Butt Cores |
4,000 - 50,000 lbs. |
| 55-Gallon Drums (empty or full) |
2,000 - 6,000 lbs. |
| 300-Gallon Liquid Packs |
2,000 - 35,000 lbs. |
| Cable Reels (up to 60") |
5,000 - 45,000 lbs. |
|
| ** Estimates are a result of representative sample testing.
Actual throughput rates may vary, dependent upon methods
of feed and materials consistency. Throughputs are for
reference only — contact the factory for throughput ratings on
specific materials. |
|
|
| TECHNICAL DATA |
| Model |
DD-3-150 |
GD-3-200 |
PD-3-200 |
| Electric drive (hp) |
1-150 |
1-200 |
1-200 |
| Voltage |
480 V / 3 phase / 60 Hz |
480 V / 3 phase / 60 Hz |
480 V / 3 phase / 60 Hz |
| Optional Stand |
Variable |
Variable |
Variable |
| Charge Opening |
62" x 70" |
72" x 100" |
86" x 108" |
| Shafts |
2 - 12" tapers to 6" |
2 - 12" tapers to 6" |
2 - 12" tapers to 6" |
| Auger Diameter |
34" tapers to 20" |
42" tapers to 20" |
52" tapers to 24" |
| Auger Speed Range |
18 RPM |
18 RPM |
20 RPM |
| No. of Hydraulic Motors |
2 |
2 |
2 |
| Dimensions of Shredder (LWH) |
98" x 86" x 89" |
172" x 108" x 100" |
200" x 112" x 159" |
| Weight (approx.) |
26,000 |
48,000 |
61,000 |
| Maximum Charge Capacity* |
4 cu. yd. |
6 cu. yd. |
8 cu. yd. |
| HPU dimensions (LWH) |
9' x 5'0" x 9'8" |
9' x 5'0" x 9'8" |
9' x 5'0" x 9'8" |
Specifications are subject to change *
Operational volumes will vary with materials and horsepower selection.
|
